Exhibition stall design at REI Greater Noida: Aatmanirbhar Solar corner stand with a raised LED video cube

Year: 2026

Solar Industry

Client: Aatmanirbhar Solar, Greater Noida

2 Side Open · Design · Fabrication

Aatmanirbhar Solar

Aatmanirbhar Solar Exhibition Stall Design at REI Greater Noida 2026

Client: Aatmanirbhar Solar

A four-sided LED cube sits a storey above the counter and runs factory footage over the heads of everyone in the aisle. Orange fins frame the bays below it, each one holding a backlit panel on capacity, warranty or the Kusum scheme. Planters are built into the feet of the columns. Inside, dark timber laminate and glass tables make a quieter room for the longer conversations.

Project Details

Client
Aatmanirbhar Solar
Industry
Solar Industry
Exhibition
REI Expo 2026
Location
Greater Noida, India
Year
2026
Type
2 Side Open
Stall Area
48 sqm
Height
3.5 m
Style
Orange-framed stand with a raised LED cube

2026 · REI Expo 2026

Aatmanirbhar Solar Exhibition Stall Design at REI Greater Noida 2026 — photo 2
Context

The Brief

Aatmanirbhar sells modules out of a 1.6 GW plant at Khargone, and 48 sqm on a two-side corner gives you very little wall to say that on. We put the exhibition stall design at REI Greater Noida to work vertically, because height is the one dimension a corner plot does not charge you for.

Exhibition
REI Expo 2026
Venue
India Expo Centre & Mart
Location
Greater Noida, India
Aatmanirbhar Solar Exhibition Stall Design at REI Greater Noida 2026 — photo 3
Services

What We Delivered

2 Side Open
LED video cube lifted above the stand
Orange vertical fins framing each bay
Planters built into the column feet
Backlit capacity and warranty panels
Enclosed meeting cabin

Materials Used

White laminate wall panelsOrange painted fin columnsLED video cube on four facesBacklit graphic framesIntegrated planter boxesDark timber laminate flooringAcrylic illuminated logo
Aatmanirbhar Solar Exhibition Stall Design at REI Greater Noida 2026 — photo 4

Case Study

01

The Challenge

Aatmanirbhar sells modules out of a 1.6 GW plant at Khargone, and 48 sqm on a two-side corner gives you very little wall to say that on. We put the exhibition stall design at REI Greater Noida to work vertically, because height is the one dimension a corner plot does not charge you for.

02

What We Designed

A four-sided LED cube sits a storey above the counter and runs factory footage over the heads of everyone in the aisle. Orange fins frame the bays below it, each one holding a backlit panel on capacity, warranty or the Kusum scheme. Planters are built into the feet of the columns. Inside, dark timber laminate and glass tables make a quieter room for the longer conversations.

03

Why It Worked

Height was the right place to spend the budget. The video reads from three aisles away, well before the fascia lettering resolves, and orange picks out of a hall where almost every solar stand is white or blue. At ground level the stall stays quiet enough to sit in, which is what the cabin and the timber floor are for.

Project Outcomes

The Result

LED video cube lifted above the stand

Key Feature

48 sqm

Exhibition Area

3.5 m

Stall Height

White laminate wall panels

Primary Material

Project Summary

Height was the right place to spend the budget. The video reads from three aisles away, well before the fascia lettering resolves, and orange picks out of a hall where almost every solar stand is white or blue. At ground level the stall stays quiet enough to sit in, which is what the cabin and the timber floor are for.

Start Your Project

Planning an exhibition presence that needs to look sharp and perform under pressure?

Share your exhibition brief — stall size, show name, and brand requirements. We respond with a design concept within 72 hours.

23+Years of Experience
6000+Exhibition Stalls Built
14+Countries Delivered
9+Industries Served