Year: 2026
Automation Industry
Client: Wecon India, Mumbai
3 Side Open · Design · Fabrication
Wecon India
Wecon India: 48 sqm Exhibition Stall Design at Automation Expo Mumbai 2026
Client: Wecon India
Teal appears three ways: as a keyline drawn round the front graphics, as the laminate on every base cabinet, and as LED glow under the counters and skirting. A circular niche cut into one wall frames the A500 PLC on its own. Further along, a printed servo and VFD board runs above a counter of motors and inverters, and the IIoT corner carries a live dashboard, HMI panels and wired demo devices — the working corner of the product demonstration stand.
- Client
- Wecon India
- Industry
- Automation Industry
- Exhibition
- Automation Expo 2026 Mumbai
- Location
- Mumbai, India
- Year
- 2026
- Type
- 3 Side Open
- Stall Area
- 48 sqm
- Height
- 3.5 m
- Style
- Teal and white zoned display architecture
Project Details
2026 · Automation Expo 2026 Mumbai
The Brief
Wecon India works in teal, not the blue everyone else in the hall was using, and that alone could carry the stand if we kept it disciplined. The 48 sqm plot was open on three sides and had to hold HMIs, PLCs, servo drives, VFDs and a working IIoT demo. Our exhibition stall design at Automation Expo Mumbai needed zones, not one long wall.
What We Delivered
Materials Used
Case Study
The Challenge
Wecon India works in teal, not the blue everyone else in the hall was using, and that alone could carry the stand if we kept it disciplined. The 48 sqm plot was open on three sides and had to hold HMIs, PLCs, servo drives, VFDs and a working IIoT demo. Our exhibition stall design at Automation Expo Mumbai needed zones, not one long wall.
What We Designed
Teal appears three ways: as a keyline drawn round the front graphics, as the laminate on every base cabinet, and as LED glow under the counters and skirting. A circular niche cut into one wall frames the A500 PLC on its own. Further along, a printed servo and VFD board runs above a counter of motors and inverters, and the IIoT corner carries a live dashboard, HMI panels and wired demo devices — the working corner of the product demonstration stand.
Why It Worked
Splitting the plot into four readable zones meant a visitor could arrive for HMIs and leave having seen the drives. Teal cabinetry gave the storage and cable runs somewhere to go without breaking the white. The curved openings between wall sections kept sightlines through. For this exhibition stall design at Automation Expo Mumbai, restraint in colour did most of the work.
Inside the Build
The Result
circular porthole niche framing a single plc
Key Feature
48 sqm
Exhibition Area
3.5 m
Stall Height
white and teal laminate
Primary Material
Project Summary
Splitting the plot into four readable zones meant a visitor could arrive for HMIs and leave having seen the drives. Teal cabinetry gave the storage and cable runs somewhere to go without breaking the white. The curved openings between wall sections kept sightlines through. For this exhibition stall design at Automation Expo Mumbai, restraint in colour did most of the work.
Planning an exhibition presence that needs to look sharp and perform under pressure?
Share your exhibition brief — stall size, show name, and brand requirements. We respond with a design concept within 72 hours.